Effect of nonsolvent additives on PES ultrafiltration membrane pore structure

Different nonsolvent additives, namely, diethylene glycol, n-butyl alcohol (NBA), and ethylene glycol monomethyl ether, were added into the casting solution (polyethersulfone/dimethylformamide/lithium chloride) to prepare ultrafiltration (UF) membrane via phase inversion. The effects of different additives and their concentration on the pore structure of the prepared UF membrane were studied. The cross-sectional morphology of the membrane was observed via scanning electron microscopy. The addition of nonsolvent additives improved the large-cavity structure of the membrane. When the additive was low-content NBA (1–3 wt %), the membrane pore structure transformed from large-cavity structure to fully sponge-like structure. When the content of additive NBA was 3 wt %, the flux of the prepared UF membrane was 130.45 L (m⁻² h⁻¹), the rejection of PEG20000 was 95.54% and the flux remained high at 4 bar in long-term stability test. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47525.     

Novel hydrophilic N-halamine polymer with enhanced antibacterial activity synthesized by inverse emulsion polymerization

N-halamine-based antibacterial agents have high efficiency and rechargeable antibacterial properties. However, their applications are limited due to their complex synthetic process and fuzzy antibacterial mechanism. In this study, a novel N-halamine antibacterial polymer was synthesized by inverse emulsion polymerization and characterized by Fourier transform infrared, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy. Due to the difficulty of purification, most of the subjects studied previously were hydrophobic polymers, while little research on hydrophilic polymers. In this experiment, this difficulty was overcome by controlling the dosage of sodium hypochlorite and methods of dialysis. Because of the complex cell structure of Gram-negative bacteria, it is difficult for N-halamines to release the oxidizing chlorine into the cell. However, the hydrophilic N-halamines can solve this problem, which showed a stronger antibacterial effect on Gram-negative Escherichia coli synthesized in this study. In addition, the particle size and hydrophilic property of the polymer were changed by changing the amount of initiator, and the differences in their antibacterial properties were studied. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47419.     

一种X煤在首钢的应用实践

针对当前优质炼焦煤资源越来越少，而高炉生产对焦炭质量指标要求越来越高的情况下，对具有低灰、高硫特点的X煤进行了系统的炼焦试验研究。结果发现，在炼焦生产中合理配加5%～8%的X煤不会造成焦炭硫分升高的不利影响，焦炭灰分下降明显，强度保持稳定。该研究成果成功应用于首钢炼焦生产，焦炭各项指标均达标，这不仅扩大了炼焦煤的使用范围，而且在资源使用方面为公司焦炭灰分的降低提供了支持。     

Robust orientation control of multi‐DOF cell based on uncertainty and disturbance estimation

Multiple degrees‐of‐freedom (multi‐DOF) cell orientation control is a vital important technique involved in single cell surgery applications. Currently, few studies have been performed toward automation of multi‐DOF cell orientation control using robotically controlled optical tweezers. In this paper, a robust control framework is developed to perform multi‐DOF cell rotational control with consideration of model uncertainties and external disturbances. Both simulation and experimental studies are presented to illustrate the performance of the proposed control strategy. The main contributions of this work lie in that this is the first time to develop a unified framework to achieve multi‐DOF cell orientation control without the need for accurate dynamic model parameters and/or any knowledge about uncertainty characteristic, which greatly enhances the robustness of the overall system.     

面向数据流结构的指令映射优化方法

在高性能计算领域,数据流是一类重要的计算结构,也在很多实际场景表现出很好的性能和适用性。在数据流计算模式中,程序是以数据流图来表示的,数据流计算中一个关键的问题是如何将数据流图映射到多个执行单元上。通过分析现有数据流结构的指令映射方法及其不足,提出了基于数据流结构的新型指令映射优化方法。主要是根据多地址共享数据包的特性对指令映射方法进行优化,延迟多地址共享数据路由包的拆分,减少网络拥堵。     

15CrMoG钢棒材表面缺陷机理分析和工艺改进

分析得出,棒材表面细小纵裂纹和表面裂口缺陷产生于铸坯加热之前,且与结晶器弯月面保护渣有关。利用Thermo-Calc热力学软件计算15CrMoG钢凝固相变过程,结合亚包晶钢连铸凝固特点综合分析15CrMoG钢棒材表面缺陷的产生原因和产生机理。结果表明:15CrMoG钢在固相线温度附近发生包晶反应L+δ→γ和包晶转变δ→γ,不仅导致初生坯壳生长不均匀,而且加剧P、S元素在凝固前沿的偏析。而初生坯壳不均匀是导致棒材表面缺陷根本原因。棒材表面细小纵裂纹产生于结晶器内坯壳薄弱处,经过二冷和轧制工序在夹杂物和硫偏聚处扩展长大。棒材表面裂口缺陷是初生坯壳不均匀导致结晶器内液面波动大,造成铸坯夹渣所致。通过控制[C]0.16%～0.17%、[S]≤0.005%、保护渣碱度1.2、熔点≥1200℃、粘度≥1.0Pa·s,260 mm×30mm铸坯水量150 m³/h,拉速0.5 m/min等措施,裂纹合格探伤合格率由原45%提高至98%。     

Revisiting the Parallel Strategy for DOACROSS Loops

Journal of Computer Science and Technology - DOACROSS loops are significant parts in many important scientific and engineering applications, which are generally exploited pipeline/wave-front...     

A Temperature‐Responsive Boronate Core Cross‐Linked Star (CCS) Polymer for Fast and Highly Efficient Enrichment of Glycoproteins

Fast and highly efficient enrichment and separation of glycoproteins is essential in many biological applications, but the lack of materials with high capture capacity, fast, and efficient enrichment/separation makes it a challenge. Here, a temperature‐responsive core cross‐linked star (CCS) polymer with boronate affinity is reported for fast and efficient enriching and separating of glycoproteins from biological samples. The temperature‐responsive CCS polymers containing boronic acid in its polymeric arms and poly(N‐isopropyl acrylamide) in its cross‐linked core are prepared using reversible addition‐fragmentation chain transfer polymerization via an “arm‐first” methodology. The soluble boronate polymeric arms of the CCS polymers provide a homogeneous reaction system and facilitate interactions between boronic acid and glycoproteins, which leads to a fast binding/desorption speed and high capture capacity. Maximum binding capacity of the prepared CCS polymer for horseradish peroxidase is determined to be 210 mg g^?1, which can be achieved within 20 min. More interestingly, the temperature‐responsive CCS polymers exhibit rapid reversible thermal‐induced volume phase transition by increasing the temperature from 15 to 30 °C, resulting in a facile and convenient sample collection and recovery for the target glycoproteins. Finally, the temperature‐responsive CCS polymer is successfully applied to enrichment of low abundant glycoproteins.     

Chemotherapy drugs derived nanoparticles encapsulating mRNA encoding tumor suppressor proteins to treat triple-negative breast cancer

Triple-negative breast cancer (TNBC) is one type of the most aggressive breast cancers with poor prognosis. It is of great urgency to develop new therapeutics for treating TNBC. Based on current treatment guideline and genetic information of TNBC, a combinational therapy platform integrating chemotherapy drugs and mRNA encoding tumor suppressor proteins may become an efficacious strategy. In this study, we developed paclitaxel amino lipid (PAL) derived nanoparticles (NPs) to incorporate both chemotherapy drugs and P53 mRNA. The PAL P53 mRNA NPs showed superior properties compared to Abraxane^® and Lipusu^® used in the clinic including high paclitaxel loading capacity (24 wt.%, calculated by paclitaxel in PAL), PAL encapsulation efficiency (94.7% ± 6.8%) and mRNA encapsulation efficiency (88.7% ± 0.7%). Meanwhile, these NPs displayed synergetic cytotoxicity of paclitaxel and P53 mRNA in cultured TNBC cells. More importantly, we demonstrated in vivo anti-tumor efficacy of PAL P53 mRNA NPs in an orthotopic TNBC mouse model. Overall, these chemotherapy drugs derived mRNA NPs provide a new platform to integrate chemotherapy and personalized medicine using tumor genetic information, and therefore represent a promising approach for TNBC treatment.